522HS75S
$1,099.00
A 21.7cc, single-sided hedge trimmer with a 30″ cutter bar for trimming jobs. Equipped with a leaf catcher for less clean-up. The comfortable handle with optimized weight distribution and impressively low weight combined with the slim, balanced design and low vibration levels provide excellent handling, while the high capacity, high-speed professional knife blade and impressive power output allows for excellent cutting performance.
The design of the cutting blades provides efficiency.
The hardened steel blades, optimized edge angles and the high knife speed increase productivity when trimming.
The leaf catcher simplifies cleaning out fine hedge clippings
The integrated leaf catcher on our single-side hedge trimmers helps to remove clippings while cutting which means less time spent after-cleaning
Internal gears have been specially designed for long life and tested under tough conditions
Internal gears have been specially designed for long life and tested under tough conditions
Less cost for service and less engine wear
The unloosable two-stage air filter in dual materials provide less cost for service and less engine wear.
Sharp and robust cutting teeth for high productivity and long product life.
Sharp and robust cutting teeth for high productivity and long product life.
Auto return stop switch for easy starting
When the stop switch has been used, it is automatically reset to ON to facilitate the next start.
The choke is easy to reach and understand
Starting a cold engine is easier with the intuitive choke which is easy to reach and set
The engine design provides a low noise level and a more pleasant working environment.
The engine design provides a low noise level and a more pleasant working environment.
| Capacity | |
| Cutting speed | 4400 cut/min |
| Engine | |
| Cylinder bore | 32 mm |
| Cylinder displacement | 21.7 cm³ |
| Cylinder stroke | 27 mm |
| Electrode gap | 0.5 mm |
| Fuel consumption | 620 g/kWh |
| Fuel consumption | 0.36 kg/h |
| Fuel tank volume | 0.45 l |
| Idling speed | 3000 rpm |
| Ignition module air gap | 0.3 mm |
| Maximum power speed | 7800 rpm |
| Output shaft power | 0.6 kW |
| Power source | Petrol |
| Spark Plug | NGK CMR6A |
| Vibration | |
| Equivalent vibration level (ahv, eq) front handle | 5.8 m/s² |
| Equivalent vibration level (ahv, eq) rear handle | 5.7 m/s² |
| Transmission | |
| Gear ratio | 4.09 |
| Gear ratio | 1 |
| Equipment | |
| Knife length | 75 cm |
| Teeth opening | 30 mm |
| Sound and Noise | |
| Sound power level, guaranteed (LWA) | 102 dB(A) |
| Sound pressure level at operators ear | 93 dB(A) |
| Dimensions | |
| Weight (complete product w/o side packed articles) | 5.1 kg |